Wotancraft Quick-Draw Camera Insert for Lightning Rider

A padded camera insert for organizing a compatible camera kit inside a larger bag. Compatibility is model-specific; the host bag and equipment shown are not included. Manufacturer fit guidance Full Frame Mirrorless Camera x2 + f/2.8 Zoom Lenses / Compatible with Velcro Pocket Modules Measurements Published main interior: 28 cm W x 21 cm H x 12 cm D / 11.02 x 8.27 x 4.72 in (W x H x D) Verified exterior dimensions are not supplied. Approximately 290 g / 0.64 lb (as specified; includes dividers where supplied) Source measurement labels and scope Main Compartment 28 x 12 x 21 cm / 11 x 4.7 x 8.2 inch Weight without dividers: ± 230 g / 0.50 lbs with dividers: ± 290 g / 0.64 lbs Fit and source caveats The size triple is 28 x 12 x 21 cm without an axis heading. The manufacturer FAQ explicitly confirms 21 cm height; the catalogue uses 28 W x 21 H x 12 D cm. The same FAQ refers to 13 cm width for camera-body clearance, differing from the 12 cm nominal depth. Verify actual opening and padded clearance. Materials Embossed cowhide stamp; Medical grade durable micro-fiber lining, less likely to fuzz after Velcro attachments; cotton lining; High-density EVA foam padding; Reinforced Bonding Nylon 66 Stitching Purchasing notes Colour variants of the same model/material/size are grouped rather than duplicated. Photos belong to the checked representative colour. Optional modules, extra inserts, straps not listed as included, cameras and lenses are separate. Water-repellent fabric and weather-resistant zippers are not a guarantee of waterproofness. Checked manufacturer source (28 October 2026) https://www.wotancraft.tw/en/product/quick-draw-camera-insert-lightning-rider-green Official product ID: ali-bdb19-greenC