Kinesis C500

Includes V100 CameraCushion divider. For a large 35mm SLR body (D1x, 1DII etc.) with a short lens attached like a 24-105/4L, 28-105, 28-135, 24-120, 24-70 etc. Front pocket will hold one shoe-mount flash unit. When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt. Does not include a shoulder strap or waist belt. Designed to fit a large body (i.e. Canon 1-series, Nikon 2-series or a 5D, 20D, D70 etc. w/ vertical grip) with small lens (18-55, 24-105/4L, 28-105, 28-135, 24-120, 24-70/2.8 etc.) attached. This is an unusual case (perhaps the only one on the market like it) because it it large enough to hold a full-size pro body, yet is short enough for a normal or wide-anlge lens. Most holster cases that are sized for a pro body are designed to hold a longer lens, like a 70-200/2.8. When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt. Will also hold a Hassleblad ELM with a 150/4 lens (with waist level finder) or Mamiya 7 with most lenses. US I.D. Specs Top = 6d*x7w Bottom = 4.5x4.5 Height = 8.4 Volume = 305 cu in (includes 50 cu in pocket) Weight = 11.5 oz. Metric I.D. Specs Top = 15d*x18w cm Bott = 11.5x11.5 cm Height = 21.5 cm Volume = 5.0 lit (includes 800 ml pocket) Weight = 322 g Double-wide allotment on belt. The C500, C580 or C640 will hold a Large SLR Body Sample bodies that will fit. With most bodies, there is enough room with a Arca-Swiss type quick-release plate on it too: • Canon 1D-series bodies or Canon 5D, D30, D60, 10D, 20D, Digital Rebel, Elan II, A2E, 1n, 1v, EOS1v or EOS3 with the optional vertical battery grip/power booster or • Nikon D2-series, D1, D1x, F5 or N8008, N6006, N70, N90s, F100, F4s The C500/C580/C640 (all have the same top opening dimension) cases will yield a comfortable fit for a body up to 16cm (4.75) deep or a tight fit for a body up to 17.5cm (6.75) deep. (The depth dimension of the these cases is 15cm (6), which is based on the rectangle-shaped opening. SLR bodies are triangular shaped, so this series of cases will house a body deeper than the rectangular depth dimension). The C500, C580 or C640 will also hold a Small SLR Body, but the body will move around a little inside the case, unless an the V100 CameraCushion is placed vertically near the prism. C380, C382 or C500 will hold a body with a Short Lens up to 16cm (6.25) long* or a combinmed body/lens height up to 21.5cm (8.4). • Canon 24 or 28-70/2.8, 80-200/4.5, 75-300/4-5.6 II USM (incl. IS), 100-300/4.5, 200/2.8, Tamron 28-105/2.8 with hood in reversed storage mode. One of the following lenses with the hood in the shooting position: 17-35/2.8, 17-40/4, 20-35/3.5, 24-85/3.5, 28-80/3.5, 28-105/3.5, 28-135/3.5-5.6 IS USM most prime lenses up to 200mm focal length. • Nikon 70-210/4.5, 70-300/4-5.6 ED AF, 28-70/2.8, 200/2.8 with hood in reversed storage mode. The following lenses with the hood in the shooting position: 20-35/2.8, 24-120/3.5, 28-105/3.5, 35-70/2.8, 28-80/3.5, 35-80/4.5, 35-105/3.5 most prime lenses up to 200mm focal length.