Kinesis C580

Includes V100 CameraCushion divider. For a large 35mm SLR body (D1x, 1DII etc.) with a longer lens attached like an 70-200/2.8, 80-400 VR, 100-400 etc. with the hood stowed. Front pocket will hold one shoe-mount flash unit. When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt. Does not include a shoulder strap or waist belt. C580 fits a small or large body with medium lens attached as defined on this page. Originally designed for a pro-sized 35mm SLR body (including D1 or 10D W/ booster, 1Ds etc.) and a 70-200/2.8. (or 80-200/2.8) lens with the hood in the storage position. This case will also accommodate any body/lens combo listed for the shorter C500 by using the CameraCushion you can elevate the body with shorter lenses so it sits near the top of the case. When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt. From the field the following reports (3/06): Just wanted to let you know that the C580 fits my new Hasselblad H2 with 50mm lens and shade like a glove! I may end up putting a shorter rubber eyepiece on the viewfinder, as its about 1/4 longer then desired, but that is about it. I have the RRS L bracket on for the camera. and another report (5/06): I thought you would like to know that the large holster case that I ordered earlier this month fits my Hasselblad H2D with the macro 120mm lens with hood on (extended). I can just reach right in and grasp the battery grip, pull the camera out and up to my eye, support it with my left hand, and shoot. All in 5 seconds! U.S. I.D. Specs Top = 6d*x7w Bottom = 4.5x4.5 Height = 12 Volume = 350 cu in (includes 50 cu in pocket) Weight = 12 oz. Metric I.D. Specs Top = 15d*x18w cm Bottom = 11.5x11.5cm Height = 30.5cm Volume = 5.8 lit (includes 800 ml pocket) Weight = 340 g Double-wide allotment on belt. The C500, C580 or C640 will hold a Large SLR Body Sample bodies that will fit. With most bodies, there is enough room with a Arca-Swiss type quick-release plate on it too: • Canon 1D-series bodies or Canon 5D, D30, D60, 10D, 20D, Digital Rebel, Elan II, A2E, 1n, 1v, EOS1v or EOS3 with the optional vertical battery grip/power booster or • Nikon D2-series, D1, D1x, F5 or N8008, N6006, N70, N90s, F100, F4s The C500/C580/C640 (all have the same top opening dimension) cases will yield a comfortable fit for a body up to 16cm (4.75) deep or a tight fit for a body up to 17.5cm (6.75) deep. (The depth dimension of the these cases is 15cm (6), which is based on the rectangle-shaped opening. SLR bodies are triangular shaped, so this series of cases will house a body deeper than the rectangular depth dimension). The C500, C580 or C640 will also hold a Small SLR Body, but the body will move around a little inside the case, unless an the V100 CameraCushion is placed vertically near the prism. C580 will hold a body with a Medium Lens up to 2.45cm (9.5) long* or a combined body/lens height up to 30.5cm (12). • Canon 70-200/2.8 (reg or IS), 75-300/4.5 IS, 70-200/4, 35-350/3.5, 300/4, 200-400/5.6 100-400/4.5 IS with hood in the reversed storage mode. 24-70/2.8 with the hood in the shooting position. • Nikon VR 70-200/2.8, AF-S 80-200/2.8 IF-ED (Silent Wave), 70-300/4, 300/4 many other long prime lenses with hood in storage mode. Will also fit the older style 80-200/2.8 w/ the HB-7 hood in the shooting position. Also fits Tamron 28-105/2.8 with the hood in the shooting position.