Kinesis L521 PolyCore Long Lens Case 500

Includes Y515 shoulder strap (not shown) A257 Body Pouch. * For a 400/2.8 lens with a body attached and hood reversed * For most 600/4 lenses w/o a body attached * For Canon 600/4 IS with body atached * Also holds 300/2.8, 500/4 or 500/4.5 lenses with a body attached and hood reversed -- we highly recommend the $19 L029 Foam Insert when using these smaller lenses. Otherwise choose the more compact L311 or L511 case. PolyCore case with semi-rigid sidewalls bottom* • For 400/2.8 lenses with a body attached and hood reversed. • For most 600/4 lenses without the body attached and hood reversed (with leatherette lens cover). Also will hold some 600s with a body attached including the Canon 600/4 IS with a body (20D, 1Ds II etc.) the leatherette cap attached the hood reversed. • For 300/2.8, 500/4 or 500/4.5 lenses** with a body attached and hood reversed (with leatherette lens cover). This case will not will not hold Nikon 600/4 AF-S or AF-S II lens unless a Wimberely adapter plate is used (#AP-652 or #AP-452, $79.00) in place of the OEM very tall mounting foot supplied by Nikon. **Note: This case is sized to fit large booster-driven SLRs bodies (with a little extra room so you can reach in and around the body) and 400/2.8 lens. You may find the 300/2.8 lens dwarfed by the large inside diameter of this case. We highly recommend the $19 L029 Foam Insert when using a 300mm or 500mm with this case. Otherwise choose the more compact E980, L311 or L511 instead. *PolyCore is an exclusive Kinesis design offering semi-rigid side walls yielding more protection than traditional soft-side cases. U.S. Specs 21h x 8.8 dia I.D.* 22h x 10.2 dia O.D.** Volume = 1127 cu in Weight with A257 pouch shoulder strap: 4 lbs. 8 oz. Metric Specs 53h x 22.5cm dia I.D.* 56.5h x 25.8cm dia O.D.** Volume = 18.5 lit Weight with A257 pouch shoulder strap: 2kg Double-wide allotment on belt or packframe. (Realistically, this case is too large to conveniently wear on a belt). *There is a little give in the lid Velcro, allowing a lens/body combo up to 54.5cm (21.5) to fit inside this case. **The lid outside diameter is 28cm (11). May 2005 improvements: the case inside height was lengthened by 15mm to 53cm to accomodate Canon 600mm's.