Kinesis L621 PolyCore Long Lens Case 600

Includes Y515 shoulder strap (not shown) A257 Body Pouch. * For most 600/4 lenses body attached (with hood stowed and leatherette lens cap in place). * Will also carry some 400mm lenses with hood attached or a 800/5.6 without a body. * PolyCore case with semi-rigid sidewalls bottom* * For most 600/4 lenses body attached (with hood stowed and leatherette lens cap in place). * This case will not will not hold Nikon 600/4 AF-S or AF-S II lens unless a Wimberely adapter plate is used (#AP-652 or #AP-452, $79.00) in place of the OEM very tall mounting foot supplied by Nikon. * Will also carry some 400mm lenses with hood attached or a 800/5.6 without a body (with leatherette lens cover). * Also fits Sigma 800/5.6 EX lens with a body attached *PolyCore is an exclusive Kinesis design offering semi-rigid side walls yielding more protection than traditional soft-side cases. Due to new airline carry-on baggage regulations, the L621 may be too large to carry on as hand baggage. Many airlines are enforcing the height and width specs and letting the length slide, which means the L621 case will usually eek by. See our airline baggage page on this Web site for more details. U.S. Specs 22.25h x 8.8 dia I.D.* 24h x 10.2 dia O.D.* Volume = 1135 cu in Weight with A257 pouch shoulder strap: 4 lbs. 12 oz. Metric Specs 57h x 22.5cm dia I.D.* 61h x 25.8cm dia O.D.** Volume = 22 lit Weight with A257 pouch shoulder strap: 2.2kg Double-wide allotment on belt or packframe. (Realistically, this case is too large to conveniently wear on a belt). *There is a little give in the lid Velcro, allowing a lens/body combo up to 58.5cm (23) to fit inside this case. **The lid outside diameter is 28cm (11).